鋼筋加工棚主要用于路途、修建、橋梁工地施工上，一聽名字就知道是用于鋼筋加工零件所建的一個防護棚，能夠用來遮雨避陽，使工人在氣候條件不允許的情況下進行作業生產。

The steel bar processing shed is mainly used for road, construction, and bridge construction sites. The name suggests that it is a protective shed built for steel bar processing parts, which can be used to shelter from rain and sunlight, allowing workers to carry out work and production in weather conditions that do not allow.

鋼筋加工棚常用的尺度有兩種，一種是寬4000*長6000*高3500㎜，另一種是寬6000*長9000*高3500mm，鋼筋加工棚的結構分為立柱、橫梁、雙層龍骨，氟碳涂層彩鋼板，防砸木板5大類，這些大類拼裝出一整套的鋼筋加工棚，連接方法。運用鍍鋅緊固件，按照?qǐng)D紙量好場所尺度后先垂立立柱，立柱設備結束后在立柱前端設備橫梁，等設備好橫梁后依據圖紙量好龍骨尺度散布設備，這一步完成后直接設備防砸模板，終究一步便是氟碳涂層彩鋼板的設備。

There are two commonly used dimensions for steel bar processing sheds. One is 4000 mm wide * 6000 mm long * 3500mm high, and the other is 6000 mm wide * 9000 mm long * 3500mm high. The structure of the steel bar processing shed is divided into five categories: columns, crossbeams, double-layer keels, fluorocarbon coated color steel plates, and anti impact wooden boards. These categories assemble a complete set of steel bar processing sheds and their connection methods. Using galvanized fasteners, after measuring the site scale according to the drawing, the column is first erected. After the column equipment is completed, the crossbeam is installed at the front end of the column. After the crossbeam is installed, the keel scale is measured according to the drawing to spread the equipment. After this step is completed, the anti smashing template is directly installed, and the final step is to use fluorocarbon coated color steel plate equipment.

看似設備麻煩，實則設備簡略，運送便利，是工地鋼筋防護棚的挑選，鋼筋加工棚和鋼管防護棚的比照：鋼筋加工棚符合出產標準化要求，定型組裝和設備，配色，結構，可達到標準化要求。

Although the equipment may seem complicated, in reality, it is simple and easy to transport. It is the selection of steel reinforcement protection sheds for construction sites. The comparison between steel reinforcement processing sheds and steel pipe protection sheds: the steel reinforcement processing shed meets the standardized requirements for safe production, with standardized assembly and equipment, color matching, and structural safety, which can meet the standardized requirements.

鋼筋加工棚選用規范不銹鋼板材制做，兩層防墜構造，結實用，規范化設計方案，全組裝式，快組裝，拆裝簡易，運送。伴隨著市場經濟體制的發展趨勢，修建工程施工公司遭遇著強烈的市場需求。怎樣打造出平穩，美觀大方的文明行為施工工地是各個施工工地需要應對的難點，施工工地鋼筋加工棚是修建工程施工平穩管理方法為要害的一環。

The steel processing shed is made of standard stainless steel plates, with a two-layer anti fall structure, practical structure, standardized design scheme, fully assembled, fast assembly, easy disassembly and transportation. With the development trend of the market economy system, construction companies are facing strong market demand. How to create a stable, aesthetically pleasing and civilized construction site is a difficult point that each construction site needs to deal with. The steel processing shed on the construction site is a crucial part of the smooth management method for construction projects.

鋼筋加工棚應怎樣設置？

How to set up a steel processing shed?

1、各種防護棚應該有單的模板支撐體系，固定不動平穩。制止用竹子搭設，且不行懸挑腳手架在外面架子上；

1. Various protective sheds should have a single template support system that is fixed and stable. Prohibit the use of bamboo for construction, and do not hang scaffolding on external shelves;

2、收支房屋修建行為主體通道口應搭設防護棚。棚寬闊于道閘，兩邊各長出1m，凈寬規格應合乎高空作業平穩防護區域。掉落半徑（R）各自為：當下跌物高度為2~5m時，R為3m；當下跌物高度為5~15m時，R為4m；當下跌物高度為15~30m時，R為5m；當下跌物高度超過30m時，R為6m；

2. The main body of the income and expenditure housing construction behavior should set up protective sheds at the safety passage entrance. The shed is wider than the gate, with a length of 1m on each side. The net width specification should comply with the safe and stable protection area for high-altitude operations. The falling radii (R) are: when the height of the falling object is 2-5m, R is 3m; When the height of the falling object is 5-15m, R is 4m; When the height of the falling object is 15-30m, R is 5m; When the height of the falling object exceeds 30m, R is 6m;

3、木匠加工場所、修建鋼筋加工場所等上邊有可能下跌物品或處在起重設備調桿旋轉區域以?xún)?nèi)，應搭設兩層防護棚；

3. Two layers of protective sheds should be erected on carpenter processing sites, steel reinforcement processing sites, and other areas where objects may fall or are within the rotating area of lifting equipment adjustment rods;

4、非通道口應設定禁行標志，制止收支。

4. Non safe passage entrances should be marked with no traffic signs to prevent income and expenditure.

5、平穩防護棚應選用兩層保護措施，當選用腳板口腔上皮細胞，層間隔600mm，鋪裝方位應相互垂直；

5. A stable protective shed should be equipped with two layers of protective measures. When using foot board oral epithelial cells, the layer spacing should be 600mm, and the paving direction should be perpendicular to each other;

6、內場（外）路面邊框線與房屋修建（或外腳手架）邊緣間距各自低于掉落半徑的，應搭設平穩通道。

6. If the distance between the boundary line of the inner (outer) road surface and the edge of the building construction (or outer scaffolding) is lower than the falling radius, a stable and safe passage should be erected.